Tuesday, July 12, 2016

$100 million Noah’s Ark built with timber from Wood-Mizer sawmill

A Wood-Mizer LT40 sawmill on-site for additional last minute construction needs

Note: To reprint this press release, please contact Jacob Mooney.

The mammoth Ark Encounter project is being recognized as the world’s largest freestanding timber frame structure, with a total of 7,300 cubic metres  of timber used in its construction.

Get articles like this in your inbox! 

A football field and a half long, the volume of the Biblically scaled Ark is the equivalent of 500 standard semi-truck trailers, and features three levels of exhibits, with a 1,600-seat restaurant being prepped on the top deck. The Ark’s maximum capacity is 10,000 people, however organizers plan to limit it to 3,000 inside at any one time.

Massive reclaimed spruce and Douglas fir logs await placement in the Ark

The $100 million project took just over one year and a half to build with the timber frame construction designed and supplied by Colorado Timberframe in Lafayette, Colorado. Just over 2,800 cubic metres of square timbers were required for the timber frame itself.

“For our massive project, we needed a special partner,” said Mark Looy of the Ark Encounter. “Colorado Timberframe was the only company that had a CNC machine large enough to handle our design specs for our timbers. And it was a large enough company to handle our volume.”

The Colorado Timberframe team responsible for delivering the largest freestanding timber frame in the world.

To meet the construction deadlines, Colorado Timberframe hired additional help, and transitioned to a three-shift work schedule for 6 days a week for an entire year. A number of 25 employees worked in the workshop just outside of Denver while 10 more were onsite to install the timber frame project in Kentucky, along with 75 Amish craftsmen employed by the main construction contractor.

“We had the capability of doing this entire project, as we have recently upgraded our equipment,” said Keenan Tompkins, owner of Colorado Timberframe.

We were the only company that can do the sizes of the timbers that they had, and actually fabricate all the timbers on the machines.” In addition to more staff, Mr. Tompkins said that several machines were vital to fulfilling the unique orders and meeting the tight construction deadlines. 

The Wood-Mizer LT15 sawmill. Photo supplied by Wood-Mizer.

An extended personal sawmill manufactured by Indiana-based Wood-Mizer Sawmills was used to resize rough-sawn 610mm X 610mm beams of up to 12 metres long to the exact dimensions required for the complex structure.

The LT15 model sawmill used for the project is among the smallest bandmills Wood-Mizer offers – the standard model fitting neatly into the bed of a pickup truck.

“50% of the timber had to be resized,” Tompkins said. “So that’s where we really worked the Wood-Mizer for a year. We had one full-time guy resizing timbers for the Ark project.”

The Hundegger K2I CNC machine, capable of machining beams up to four feet wide and 60 feet long.

“Then the timber went through the K2I Hundegger CNC machine,” said Tompkins. “We have a four foot wide track [1.2 m], and it can do four foot wide [1.2 m] to up to 20 inches [500 mm] tall, and 60 feet long [18 m]. It does all the mortise and tenon joints, as well as drillings and slot cuts, and any kind of recesses or notches that the timbers need to accommodate either the wood connections or the steel plates.” The German-based Hundegger company supplies a wide range of industrial woodworking equipment.

Massive reclaimed spruce and Douglas fir logs line the center of the Ark

One of the most impressive timber aspects of the ark are the 15-metre tall logs that line the center, many of which are 1 metre in diameter at the base. 30% of these logs are reclaimed Engelmann spruce that had been killed by invasive beetles, and were standing dead.

“We tried to use as much reclaimed timber as possible,” said Tompkins. “We made a deliberate and concentrated effort to incorporate as many as those reclaimed logs as possible.”

The complex timber frame on full display.

Massive reclaimed spruce and Douglas fir logs line the center of the Ark.

“Wood is such a versatile product,” said Tompkins. “If you look back through history, there are plenty of examples of extremely large structures, some of which are even still standing today.

"So it’s kind of going back to incorporating and using that, but applying it in a modern context and having it meet the modern engineering standards that we have today.”

The Ark Encounter was opened to the public July 7, 2016 in Williamstown, Kentucky. More than one million people are estimated to visit during the first year, and additional Biblically themed attractions are already in development for the future.  

More information:
Note: To reprint this press release, please contact Jacob Mooney.

Press Photos: 

The world's largest freestanding timber frame under construction.



Welcome to the stories and articles section of our website.

Here you will discover how Wood-Mizer sawmill owners worldwide are actively growing local economies by processing wood more sustainably and profitably. 

We invite you to contact us for any questions about these articles.