EG400 EDGER

A VERSATILE INDUSTRIAL-LEVEL EDGER

Get prices & info!

The EG400 is a rugged board edger that is at home in commercial sawing businesses that require a fast, accurate, and heavy-duty board edger. The EG400 edges material 700mm wide by 100mm high at 30 metres per minute, and smaller material at up to 54 metres per minute.

The remote operator’s control console manages all edger functions, and can be repositioned as needed. The 22kW motor delivers plenty of power for softwoods and hardwoods. The edger automatically adjusts feed speed depending on the thickness of the board being cut. Two 400mm blades are mounted on a splined shaft and move in and out from the centre, allowing the use of an optional outfeed board conveyor.

Two lasers are standard on the EG400 for board positioning, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers. The standard infeed table is available with optional rip fences.

An optional tailer outfeed keeps the edged boards moving through the line, while enabling easy waste removal. Optional electronic setworks are available.

EG400 EQUIPMENT

22kW Electric motor

22 kW Electric motor
Power for softwoods and hardwoods.

Remote operator’s console

Remote operator’s console
Reposition controls in the best location for operator productivity.

Two 400mm circular blades

Two 400 mm circular blades
Move in and out from the centre.

Two lasers

Two lasers
The twin lasers enable the operator to see how to get the most out of the board.

EG400 video

specification

Power
Standard 22 kW electric
Cutting Capacity
Max. Feed width 900 mm
Max. Board Width Cut 700 mm
Min. Board Width Cut 76 mm
Max. Board Thickness 100 mm
Min. Board Thickness 25 mm
Min. Board Length 1.1 m
Edger Features & Options
Standard 2 circular blades
Set of 2 Lasers
Infeed table
Flat Outfeed table
Options Setworks
Heavy-duty outfeed tailer
Feed System
Feed speed 0-25 m/min
Blade
Diameter 406 mm
No. blades 2
Edger Requirements
Normal power usage 400 V 50 Hz 3Ph: 70 Amp

Latest Success Stories

US family business grows with 3 WM4000 sawmills

US family business grows with 3 WM4000 sawmills

Manufacturing pallets for nearly 40 years, Coomer & Sons Sawmill has grown from a small garage start-up to producing thousands of pallets daily. They operate three...
American sawmill upgrades to WM4000 technology

American sawmill upgrades to WM4000 technology

By installing a Wood-Mizer WM4000 thin-kerf industrial headrig to replace their old circular sawmill, Mike and Shawn positioned Honey Grove Hardwoods, LLC on the cutting edge...